
Marker
Thin or broad marks, at rough, rusty, smooth or surfaces susceptible to corrosion, at minus or very hot temperatures - you will find the right marker for your application in HELLING's collection:
- Lack marker
- Solid paint crayons
- Tube marker
- Welders pencils
and others...

Liquid paint marker for long-lasting marks in opaque, bright colours on nearly any surface
- Xylene-free
- Low-odour
- Fast-drying
- Weather- and UV-resistant
- Temperature Range: -4° F to 122 °F (-20 °C to 50 °C)
- Mark temperature resistance up to 100 °C (212 °F)
Applicable for
- Steel and iron
- Rubber
- Glass
- Plastic
- Ceramic
- Textiles
- Cardboard
- Non-ferrous metals
- Tiles
- Concrete and stone
- Alloy and superalloy metals
Scope of delivery
1 packaging unit = 1 box à 12 pieces






Chalk-based liquid paint, easily removable with water from any smooth, non-porous surface
- Smooth non-permanent marks
- Wear-resistant medium-size bullet tip
- Valve-actuated tip releases paint on-demand only
- Temperature range 41 °F to 104 °F (+5 °C to 40 °C )
- Mark temperature resistance: 176 °F (80 °C)
Suitable for
- Steel, iron, non-ferrous metals
- Alloys, superalloys
- Rubber
- Glass
- Plastic
Scope of delivery
1 packaging unit = 1 box à 12 pieces






Sulphur- and chloride-depleted paint marker. Suitable for use on stainless steel, alloy, and super alloy metals where corrosion resistance is a major requirement.
Also available with PMUC Certificetificate for nuclear plants (e.g. EDF, France). Traceable to a manufactured batch number
Official PMUC certification:
- 200 ppm total halogens (chlorine, fluorine, bromine, iodine)
- 200 ppm sulphur
Furthermore:
- Xylene-free
- Fast-drying
- Permanent
- Temperature range -4 °F to 122 °F (-20 °C to 50 °C)
- Mark temperature resistance 212 °F (100 °C)
Applicable for
- Stainless steel
- Alloy and super alloy metals
Scope of delivery
1 packaging unit = 1 box à 12 pieces







Durable, strong markings on oily surfaces
- Fast-drying
- Nearly non-corroding
- Weather-resistant
- Friction-resistant
- Light-resistant
- Temperature range -46 °C - 66 °C
Suitable for surfaces:
- Steel, iron
- Aluminium
- Plastic
- Rubber
Scope of delivery
1 packaging unit= 1 box à 12 pieces






Durable, strong markings on wet surfaces
- Fast-drying
- No smearing/dispersing
- Temperature range -46 °C - 66 °C
Suitable for surfaces:
- Steel, iron
- Aluminium
- Plastic
- Rubber
- Glass, ceramic
Scope of delivery
1 packaging unit= 1 box à 12 pieces






Durable markings on rough surfaces
- Fast-drying
- Nearly non-corroding
- Weather- and chemicals-resistant
- Friction-resistant
- Xylene-free
- Temperature range -46 °C - 66 °C
- Suitable for rough, rusty or dirty surfaces
Suitable for surfaces:
- Steel, iron
- Non-ferrous metals
- Plastic
- Rubber
- Glass, ceramic
Scope of delivery
1 packaging unit= 1 box à 12 pieces






Laquer marker with extra-large tip for large, durable and well visible markings. Over the valve tip, dye will be dispensed only if required.
- Fast-drying
- Weather- and water resistant
- Friction-resistant
- Temperature range -46 °C - 66 °C
Suitable for surfaces:
- Steel, iron
- Cardboard
- Plastic
- Glass
Scope of delivery
1 packaging unit= 1 box à 6 pieces






Metal-ball tip marker suitable for rough, vertical and overhead surfaces due to an aluminium squeeze tube and viscose paint.
- Excellent adhesion on oily and wet surfaces
- Xylene-free
- Available in 2 sizes: 3 mm and 6 mm for varied mark thickness
- Weather-, water-, and UV-resistant
- Temperature range -4 °F to 158 °F (-20 °C to 70 °C)
- Mark temperature resistance 392 °F (200 °C)
Suitable for:
- Steel, iron, aluminium
- Non-ferrous metals
- Alloys, Superalloys
- Rubber
- Plastic
- Textiles
- Concrete, stoneware
- Bitumen
Scope of delivery
1 packaging unit = 1 box à 10 pieces
Please specify the required line width (Standard 3 mm, 2 mm or 6 mm).






Metal-ball tube marker suitable for vertical and overhead surfaces due to its aluminium squeeze tube and highly viscous paint.
- Meets European requirements to the nuclear industry
- Low sulfur and low chloride contents
- Safe marking, also on stainless steel
- Offered in 2 sizes: 3 mm and 6mm for varied mark thickness
- Temperature range -4 °F to 158 °F (-20 °C to 70 °C)
- Mark temperature resistance: 200 °C (392 °F)
Official PMUC certification (available with 3 mm line width; sample analysis has verified the following concentrations:
- 200 ppm total halogens (chlorine, fluorine, bromine, iodine)
- 200 ppm sulphur)
Suitable for
- Stainless steel
- Alloy and super alloy metals
Scope of delivery
1 packaging unit = 1 box à 10 pieces
Please specify the required line width (3 mm, 3 mm with PMUC or 6 mm).







Tube marker which high-performance paint withstands temperatures up to +1.000 °C. The aluminium squeeze tube and highly viscous paint enables vertical and overhead operation, also on rough surfaces.
- Excellent adhesion on oily and wet surfaces
- Available with 2 line widths: 3 mm and 6 mm
- Operating temperature range: -4 °F to 158 °F (-20 °C to +70 °C)
Suitable for:
- Steel
- Iron
- Aluminium
- Alloy
- Superalloy metals
- Non-ferrous metals
Scope of delivery
1 packaging unit = 1 box à 10 pieces


Multifunctional and most versatile solid paint marker, superior marking performance on
- oily
- icy
- wet
- dry
- cold
- rough
- rusty
- smooth
- dirty
surfaces
- Weather- and UV-resistant
- Good durability (true lacquer recipe)
- Low halogen contents
- Temperature range -46 °C to +66 °C
Suitable for materials such as
- steel
- iron
- rubber
- wood
- plastic
- glass
- concrete
- stone
Scope of delivery
1 packaging unit= 1 box à 12 pieces






Solid paint crayon with bold, fluorescent colors
- Creates high visibility marks, especially in low light conditions
- Bright colours
- Fluorescent marks (glow under UV or black light)
- Marking range: -50 °F to 150 °F (-46 °C to 66 °C)
Applicable for surfaces of
- Steel
- Iron
- Rubber
- Wood
- Plastic
- Glass
Scope of delivery
1 packaging unit= 1 box à 12 pieces




Solid paint crayon with special formula; will not be visible through the top coat of paint or of primer. Marks do not have to be removed any more. Ideal for ship building industry and metal fabrication.
- Marking on wet, dry, oily, rusty, icy, smooth, or rough surfaces
- Easy-to-hold
- Temperature range: 0 °F to 150 °F (-18 °C to 66 °C)
Applicable for
- Steel and iron
- Wood
- Glass
- Plastic
- Concrete and Stone
Scope of delivery
1 packaging unit= 1 box à 12 pieces



Hot surface solid paint marker for high temperatures
Marked hot items can be cooled by water-quenching without any problem. Markings can be removed in an etching bath if necessary.
- Long-lasting black marks
- Fast-drying
- Will not run, char, flow, discolor, peel or crack
- Temperature range 225 °F to 1100 °F (107 °C to 593 °C)
Applicable for following materials:
- Coils
- Billets and bars
- Castings and pigs
- Ingots and plates
- Rails and beams
- Glass
Scope of delivery
1 packaging unit = 1 box à 144 pieces
Wooden holder for solid paint marker find here...






Hot surface solid paint marker writes on extremely hot steel surfaces (red glowing)
- Long-Lasting
- Weather- and fade-resistant
- Provides bright, identifiable white marks
- Marking range 400 °F to 1800 °F (204 °C to 982 °C)
Applicable for materials such as
- Coils
- Billets and bars
- Castings and pigs
- Ingots and plates
- Rails and beams
- Glass
Scope of delivery
1 packaging unit = 1 box @ 144 pieces
Wooden holder for solid paint marker find here...

Extra-large line width surface marker for marking extrem hot surfaces (white glowing).
- Extra-large line width
- Durable white marks
- Well visible under all weather conditions
- Will not run, char, flow, discolour, peel or crack
- Temperature range 1800 °F bis 2200 °F (982 °C bis 1204 °C )
Applicable for
- Coils
- Billets and bars
- Blooms
- Castings and pigs
- Ingots and plates
- Rails and beams
Scope of delivery
1 packaging unit= 1 box à 12 pieces

Smooth-marking, large twist-up solid paint crayon.
- Dries quickly
- Bold, permanent marks on most surfaces
- Durable plastic twist-up holder
- 20% more paint than other brands
- Fast-drying in 5-7 minutes
- Weather- and UV-resistant
- Temperature range 0 °F bis 392 °F (-18 °C to +200 °C)
Applicable for
- Glass, Ceramic
- Steel and iron
- Wood
- Concrete and stone
- Rubber, tires
- Plastic






Mini solid paint crayon in a convenient twist-up
- For fine line markings
- Fine line marking on smooth or rough surfaces
- Dries quickly
- Bold, permanent marks on most surfaces
- Durable plastic twist-up holder
- 20% more paint than other brands
- Fast-drying in 5-7 minutes
- Weather- and UV-resistant
- Xylene- and 2-Butoxyethanol- free formula
- Temperature range 0 °F bis 392 °F (-18 °C bis +200 °C)
Applicable for
- Glass, Ceramic
- Steel and iron
- Wood
- Concrete and stone
- Rubber, tires
- Plastic
Scope of delivery
1 packaging unit = 1 box à 12 pieces




Marking - resistent against welding. Ideal for fine line marking.
- Permanent and abrasion-resistent
- Inflammable
- Reflecting mine
- Well visible during welding or shaping
- Leaves no scratches or scrub marks
Available in 2 colours:
- Red | for aluminium or other light metals | |
- Silver | for dark surfaces |
Scope of delivery
1 packaging unit = 1 box à 12 pieces


Permanent ink marker with extended micro tip for precision markings; ideal for marking in areas hard to access, e.g. through drill holes, mounting brackets.
- Colour: black
- Dries quickly
- Suitable for almost any surface
- Wear- and weather-resistant
Suitable for materials such as
- Metal
- Plastic
- Glass
- Carboard
- Wood
- Textiles
Scope of delivery
1 packaging unit = 1 box à 12 pieces

Retractable permanent ink marker usable one-handedly
- For durable marking
- Push-button for easy opening and closing
- Auto-storing clip instantly retracts tip to reduce mess or tip damage
- Fast-drying
- Wear and water-resistant formula
- Long-lasting marks
- Industrial-grade fine bullet tip will not spread or mush
- Xylene-free
- Mark width: 1/16" (1.5 mm)
Suitable for materials such as
- Metal
- Plastic
- Glass
- Cardboard
- Paper
- Wood
Scope of delivery
1 packaging unit = 1 box à 12 pieces


Permanent ink marker with large chisel tip
- Produces fine or broad marks on almost any surface
- Extra-large ink feeding unit
- robust metal construction
- Versatile chisel tip for fine or broad marks
- Smear- and water-resistant
- Long-lasting marks
- Clip-cap stores easily in pockets
Suitable for materials such as
- Metal
- Plastic
- Glass
- Carboard
- Paper
- Wood
Non-corroding dyes (halogen-depleted) for application at corrosion-sensitive materials are available.
Scope of delivery
1 packaging unit = 1 box à 12 pieces


Permanent marker of unique composition which corrodes into synthetic surfaces of labels or etiquettes of polyurethane. Only when needed the ink is spended by the valve top.
- Permanent
- Well visible
- Abrasion-resistant
- Weather- and UV-resistant
Suitable for materials such as
- Polyurethane synthetic materials
- Animal marks
- Rubber
Scope of delivery
1 packaging unit= 1 box à 12 pieces

Marking versatility of a paper-wrapped grease pencil combined with a simple push-button advance.
- Refillable all-surface marker
- Low levels of halogens, low melting-point metals and sulphur
- Bold, permanent marks
- Universally applicable
- Rub- and weather-resistant
Applicable for
- Stainless steel
- Alloys
- Super alloy metals
Scope of delivery
- Starting package
1 packaging unit = 1 box à 6 pieces starting packages - Starting package contains 1 holder and 12 re-filling mines
- Mines for re-filling
1 packaging unit = 1 box à 12 mines








Electric arc engraver by MARKAL for marking conductive metal surfaces. Burns deeply into the conductive metals with a 40 W arc strength and 100 arcs/second for bold, permanent marks.
- Accurate marking
- Not smearing, cracking, peeling or chiping
Following electrodes are available:
- 1 mm
- 1.3 mm
- 1.5 mm
Suitable for
- all conductive metals
- Tools
Scope of delivery
- CA.003 electric arc engraver
- 12-15 V Transformer
- engraver, pack of ten 1 mm electrodes
- conductive plate receptacle
- carrying case



Etch crayon for permanent marks on metallic surfaces:
Type | Colour cartridge | application for etching of | ||
SC.862 | blue | steel | ||
SC.865 | green | stainless steel, copper, nickel, lead, alloys, bronze |



Durable wooden holder for markers
- Prevents breakage
- Easy-to-use
- Adjustable metal ring secures marker in holder
- Length 4" (10.2 cm)
Designed for use with the following solid paint markers:
Scope of delivery
1 packaging unit= 1 box à 12 pieces
